Diving Inflation Valves recall: Hypothermia
Diving Inflation Valves Recalled Due to Risk of Hypothermia; Manufactured by SI TECH
Why was Diving Inflation Valves recalled?
The internal part in the valve can malfunction while in use, causing loss of inflation and thermal protection, posing a risk of hypothermia to the consumer.
What should I do if I have this product?
Consumers should immediately stop using the dry suits with the recalled inflation valve and contact Ocean Equipment to receive a notification form and shipping information to return the recalled valve free of charge. The valve part will be replaced by trained technicians who are exclusively authorized to update the valve with a free replacement valve part. Contact: Ocean Equipment at 800-657-7736 from 9 a.m. to 4 p.m. PT Monday through Friday, by email at [email protected] or online at https://oceanequipment.ca/ and click on "Recall Notice" located at the top of the page; or go to https://www.sitech.se/articles/recall.aspx.
What to do with a recalled product: refunds, receipts, safe disposal and how to report a problem.
Is my product affected?
Compare the item in your hand with every identifier below from the official CPSC record. Only products that match the listed product and identifiers are part of this recall.
- Product
- Shell Diving Inflation Valves with Int'l Nipples for diving dry suits
- Company
- SI Tech, of Sweden, Ocean Equipment, of Canada
- Quantity
- About 1,670 (In addition, about 28 were sold in Canada)
- Sold at
- Underwater Development, Tulalip, Washington; Aquala Diving, Shreveport, Louisiana; Underwater Sports, Seattle, Washington and other dealers/dive centers and other dive suit manufacturers and distributors nationwide from April 2019 through May 2021 for about $100 per inflation valve when sold separately.
- Recall date
- April 14, 2022
- Incidents / injuries
- SI Tech has received three reports of the valve part malfunctioning, resulting in loss of inflation in the dry suit. No injuries have been reported.
- Agency
- CPSC
Product description
This recall involves the Shell Inflation Valves with Int'l Nipples that come with diving dry suits and are also sold separately. The Shell Inflation Valve is used in recreational and technical diving. The recalled valve inflates the diving dry suit to allow the diver to equalize air pressure while descending in the water by pressing on the valve and it provides thermal protection to the diver. The model number and batch code are stamped on the inside of the recalled valve. Instructions on how to find and identify the batch code can be found at www.sitech.se. Model Number 25210 JD1, JE2, JE5, JE6, JF6, JG2, JK6, JK9, JKA, JL1, JL3, KA7, KB8, KG2, KH3, KH4, KK7, KL3, LC1, LC2, LC4, LC7, LC9, LD2, LD6, LD7, LD8 25215 JG1, KA9, LC5