Trident Diving Equipment High-Pressure Scuba Diving Air recall: Drowning Hazard
Trident Diving Equipment Recalls High-Pressure Scuba Diving Air Hoses Due to Drowning Hazard
Why was Trident Diving Equipment High-Pressure Scuba Diving Air recalled?
The diving hose that connects the regulator to the tank's pressure gauge can leak, posing a drowning hazard to the user.
What should I do if I have this product?
Consumers should immediately stop using the hoses and contact Trident Diving Equipment for a free replacement hose. Contact: Trident Diving Equipment at (800) 234-3483, from 9 a.m. to 4 p.m. PT Monday through Friday, or e-mail [email protected] or online at www.TridentDive.com, then click on "Smooth High Pressure Hose Safety Recall" for more information.
What to do with a recalled product: refunds, receipts, safe disposal and how to report a problem.
Is my product affected?
Compare the item in your hand with every identifier below from the official CPSC record. Only products that match the listed product and identifiers are part of this recall.
- Product
- High-Pressure Scuba Diving Air Hoses
- Company
- Trident Diving Equipment, of Chatsworth, Calif.
- Quantity
- About 200
- Sold at
- Scuba diving retailers nationwide from November 2011 through June 2012 for about $35.
- Recall date
- April 18, 2013
- Incidents / injuries
- Trident has received one report of a hose leaking. No injuries have been reported.
- Agency
- CPSC
Product description
The recalled air hoses are high-pressure scuba air hoses with a black, smooth rubber outer covering. They are about five millimeters in diameter and 32 or 36 inches long. These hoses connect the regulator to the tank pressure gauge. The phrase "Scuba Diving High Pressure hose I.D. 3/16 (4.76 mm) W.P. 5000 PSI Exceeds SAE 100RT braid with Kevlar fiber from Dupont" is printed in white lettering on the hose's outer covering. The hoses have metal fittings on each end - one female fitting and one male fitting. "CE EN 250 230" is stamped on the female fitting and one of the following production date codes is on the male hex head fitting: T1011, T1111 or T0312.