CPSC, Invensys Building Systems Announce Recall of
CPSC, Invensys Building Systems Announce Recall of Siebe Actuators in Building Fire/Smoke Dampers
Why was CPSC, Invensys Building Systems Announce Recall of recalled?
A spring mechanism integrated with the damper, is designed to close the damper during a fire to limit the spread of smoke, fire and fumes. The recalled actuators can jam and prevent the dampers from closing. If dampers fail to close during a fire, serious injury or death can be suffered by building occupants because smoke, fire and fumes can spread through a building's ventilation system.
What should I do if I have this product?
To be eligible for a free actuator replacement, the building owner must test the actuator and report the results to Invensys. Only actuators that fail testing will be replaced. Contact: Building owners and managers whose buildings have dampers containing Invensys/Siebe actuators should immediately contact Invensys' Program Coordination Office at (877) 481-2372 between 7 a.m. and 7 p.m. CT Monday through Friday. A web site where building owners can obtain a complete copy of the program information has been established at www.regcen.com/MA200
What to do with a recalled product: refunds, receipts, safe disposal and how to report a problem.
Is my product affected?
Compare the item in your hand with every identifier below from the official CPSC record. Only products that match the listed product and identifiers are part of this recall.
- Product
- Siebe actuators
- Company
- Invensys Building Systems, of Love Park, Ill.
- Quantity
- Up to 560,000
- Sold at
- The actuators were installed by private contractors in commercial and residential buildings.
- Recall date
- October 2, 2002
- Incidents / injuries
- Building owners, damper manufacturers, and fire and safety investigators have reported dampers not closing during testing.
- Agency
- CPSC
Product description
Actuators hold open fire and smoke dampers in a building's heating, ventilation and air conditioning (HVAC) system. A spring mechanism integrated with the damper, is designed to close the damper during a fire to limit the spread of smoke, fire and fumes. These MA-200 and MA-200-1 series actuators were used in fire and smoke dampers that were manufactured by various companies from December 1993 through October 1999, which were installed by private contractors in commercial and residential buildings. The actuators have manufacture date codes of 9348 through 9947.